All The Way
The D.B. Buxton Revue Lyrics

Jump to: Overall Meaning ↴ Line by Line Meaning ↴

시원하게 부는 바람 따라
자유롭게 달려가는 거야
뭐 어디든 괜찮아

내 두 발이 닿는 곳을 따라
새로워진 길이 열릴 거야
내 마음 하나 믿고 가 no no

어둠을 뚫고서 내리는 빛을 따라 fly
가까워질수록 커져가는 목소리

더 높은 곳으로 날아 난 멈추지 않아
I don't wanna go down, down, down, down, down

날아오르는 순간 날 이끄는 감각
I'll never go down, down, down, down, down
'Cause I got me

All the way up
All the way up
좀 더 높이

All the way up
All the way up
저 끝까지
All the way up

새로운 바람이 부는 곳에 빙고
막 달려 보는 거야 Oh yeah yi yo
새 파란 바다 따라가는 거야 네가 끌리는 대로
햇빛이 날 맞추네
계절의 향기가 날 반길 때 yeah oh
하늘 높이 소리 질러봐
All the way up up up in the air
진짜를 찾아낸 마음에 빛이 밝혀져
지금껏 몰랐던 세상이 날 반겨줘

더 높은 곳으로 날아 난 멈추지 않아
I don't wanna go down, down, down, down, down

날아오르는 순간 날 이끄는 감각
I'll never go down, down, down, down, down
'Cause I got me

All the way up
All the way up
좀 더 높이

All the way up
All the way up
저 끝까지
All the way up

우연이라 말할 수 없어 이 모든 순간
날 지치게 만들었던 지난 시간들
나를 향한 소음보다 커진 심장 소리에
커져가는 자유를 느껴

더 높은 곳으로 날아 난 멈추지 않아
I don't wanna go down, down, down, down, down

나는 놓치지 않아 날 이끄는 순간
I'll never go down, down, down, down, down
'Cause I got me

All the way up
눈치 보지 말고 반응해 신경 안 써 nobody
All the way up
분발해 내일은 없어 get this party started

All the way up
딴 생각들은 집어넣어 stapler 너를 오늘 밤에 찍어 난
말리지마 우린 mortal 이지
And you got me

All the way up
All the way up
좀 더 높이

All the way up
All the way up
저 끝까지

All the way up

Overall Meaning

The D.B. Buxton Revue's song "All the Way" is an uplifting and empowering track about overcoming obstacles, soaring to new heights, and believing in oneself. The lyrics talk about following wherever the wind may take you, trusting your heart, and not letting anyone or anything bring you down. The song encourages listeners to break free from their fears and limitations and to fly as high as they possibly can. The chorus repeats the phrase "All the way up" several times, emphasizing the idea of rising to the top and achieving success.

The verse and bridge sections of the song build up the tension and excitement as the singer talks about the joy and freedom that come with flying higher and higher. The lyrics mention the sensation of being led by something greater than oneself, and the feeling of triumph that comes with breaking through darkness and reaching the light. The song also acknowledges the hardships and challenges that come with striving for greatness, but ultimately encourages listeners to keep going and never give up.

Overall, "All the Way" is a powerful and inspiring song that encourages listeners to reach for the sky and never let anything hold them back.

Line by Line Meaning

시원하게 부는 바람 따라
Following the cool breeze freely

자유롭게 달려가는 거야
Running free without any restraint

뭐 어디든 괜찮아
Anywhere is okay

내 두 발이 닿는 곳을 따라
Following wherever my feet take me

새로워진 길이 열릴 거야
A new path will open up

내 마음 하나 믿고 가 no no
Believing in my heart, no matter what

어둠을 뚫고서 내리는 빛을 따라 fly
Flying following the light that penetrates the darkness

가까워질수록 커져가는 목소리
A voice that grows louder as it gets closer

더 높은 곳으로 날아 난 멈추지 않아
I fly higher and higher, never stopping

I don't wanna go down, down, down, down, down
I don't want to fall down

날아오르는 순간 날 이끄는 감각
Sensation leading me on when I take off

I'll never go down, down, down, down, down
I'll never fall down

'Cause I got me
Because I have myself

All the way up
Going up all the way

좀 더 높이
Even higher

저 끝까지
To the very end

새로운 바람이 부는 곳에 빙고
Bingo to the place where the new wind is blowing

막 달려 보는 거야 Oh yeah yi yo
Just run forward, Oh yeah yi yo

새 파란 바다 따라가는 거야 네가 끌리는 대로
Following the new blue sea, wherever you're drawn to

햇빛이 날 맞추네
The sunlight hits me

계절의 향기가 날 반길 때 yeah oh
When the fragrance of the season welcomes me, yeah oh

하늘 높이 소리 질러봐
Shout out loud to the sky

All the way up up up in the air
All the way up up up in the air

진짜를 찾아낸 마음에 빛이 밝혀져
The light shines on my heart that has found the truth

지금껏 몰랐던 세상이 날 반겨줘
The world that I never knew before welcomes me

우연이라 말할 수 없어 이 모든 순간
I can't say that these moments are just coincidences

날 지치게 만들었던 지난 시간들
The past times that made me tired

나를 향한 소음보다 커진 심장 소리에
The sound of my heart growing louder than the noise towards me

커져가는 자유를 느껴
Feeling the growing freedom

나는 놓치지 않아 날 이끄는 순간
I never miss the moment that leads me

All the way up
Going up all the way

눈치 보지 말고 반응해 신경 안 써 nobody
Don't worry about anyone else and just react, don't care about nobody

분발해 내일은 없어 get this party started
Cheer up, there's no tomorrow, get this party started

딴 생각들은 집어넣어 stapler 너를 오늘 밤에 찍어 난
Throw away all other thoughts like a stapler, I'll capture you tonight

말리지마 우린 mortal 이지
Don't stop us, we're mortals

Lyrics © Universal Music Publishing Group, Peermusic Publishing, Kobalt Music Publishing Ltd.
Written by: JQ, Zelo, David Anthony Eames, Hye Jeong Kim, Michael Kendrick Lee, Yong Guk Bang

Lyrics Licensed & Provided by LyricFind

To comment on or correct specific content, highlight it

TRACKS

No Related Genres

More Genres

No Artists Found

More Artists Load All

No Albums Found

More Albums Load All

No Tracks Found

01Now That I Am Free1:50

02Nine Years Old2:51

03Sex With My Ex2:24

04All The Way4:52

PT4M52S

The D.B. Buxton Revue

05No Refund5:38

06I Heard You Crying3:00

07The More You Want2:09

Genre not found

Artist not found

Album not found

Search results not found

Song not found

Comments from YouTube:

Warner McGee

2y↑6

I dig how you customize your tools to suit your design needs. In this case I can see how much more useful it is to have drilled those holes in the foot pedal. Nice job! Love your channel. Happy Holidays!

Eric Strebel

Cheers!

Kevin Eusebio

2y↑12

Thanks for sharing. I work as a designer/pattern maker for a sporting goods brand so I can very much relate to this video since I use different kinds of sewing machines for my work. I mostly use a Juki arm sewing machine, great for all those thick layers of leather and an old Seiko arm sewing machine with a roller. I have 3 mods that you can add to yours:
1. Put a cushion on your knee lifter, it'll make it more comfortable
2. I attached a box with an open top (around 30x30cm) at my spool holder so that it could hold up to 9 different threads.
3. Try looking for an adjustable sewing guide that can attach beside the walking foot. It can when you're sewing near the edge of the material.
Hope these help and keep making great content sir!

Chris toe fur

2y↑3

Love this one E! I've done basic sewing, but I've been wanting to get into upholstery for motorcycle seats, automotive interior, etc. Great info!

Eric Strebel

Thanks Man!

Alison hollins

2y↑1

I've just been gifted that very same machine, so I'm super excited to get going with it. Thanks for the tips.

Jude Larkin

I have a Zoje walking foot that’s rebranded as a Singer. It’s equivalent to a Juki 1181. I don’t think the walking foot is strictly necessary but it is a nice feature. It walks right over thick stuff like sewing across a seam in thick fabric. I use Guterman Tera 80 thread. It’s a little lighter than the thread in the video but consistent and very strong. I did switch my table top out with a wooden one from Sailright. That was just an aesthetic upgrade. Modern industrial sewing machine table cutouts are fairly standard but there is a short, medium and long cutout that you have to be aware of. Older machines have a little different cutouts. One could also make their own tabletop if they were handy with a router.

max wang

2y↑1

I Never touched a sewing machine before (well, only bought two vintage domestic machines very recently but not used). Now got a brother DB2-B715 very cheap and I'm liking it. It's a beast!

Karin Corbin

45w↑1

The original Bernina Record 830 which was sold as a portable in the 1970s was also the same machine that the company sold as their industrial machine except it was put into a table with a bigger motor. Unfortunately it did not have a walking pressure foot. I bought mine new in 1974. It is still popular and current market value is $300 + because it really was very well made. From the beginning I have used it on heavier materials. The pressure foot is hinged close to the fulcrum point so it does have good speed control.

Eric Strebel

45w

Sounds like a nice machine

Eleuterio Ramalho

2y↑2

I recently purchased an Industrial sewing machine, model Refrey 906 K-3. I bought it because I'm an individual who likes to make.... I'm a mechanical engineer and I'm passionate about the construction of artifacts. This video of yours, validates my tendency to invest in robust equipment even though it is already a few years old

Eric Strebel

Enjoy

jafinch78

2y↑6

I've been rescuing the vintage sewing machines the last month or so with last week venturing into my first antique treadles. From my observations (I've not even sewn with them yet) and research, the early to mid 1970's and older domestic all metal machines are more like the industrial sewing machines compared the modern domestic sewing machines. Those vintage and antique ones can be found for under $150 if not an even more awesome price. You might have to restore or at least clean, unstick and oil... plus tune tensions... though maintenance on anything is a great skill to know.
From my observations of the beefy all metal vintage domestics (Belair 600, Sear-Kenmore & Dressmaker)... they all have reverse and even more stitch selections (especially the cam design ones) that I have no idea if I'll ever use. The antiques (Singer VS-2 27 & White FR), other than attachments by Geist, only sew in straight stitch with no reverse option. The hybrid occupied Japan Belair 600 which is a Singer 66 internals and a Singer 201 outer design can do reverse... where I was thinking that 1.0A motor was heavy duty... uh yeah... I'm just rescuing/restoring and passing em forward other than the ones I'll keep. So learning something new every day.
Thanks for sharing Eric, didn't know much anything about the industrial sewing machines.

Eric Strebel

2y↑1

Thanks for your comment much appreciated good luck with your restoration work

Snyder Tools

2y↑2

You’ve got the best videos. Thank you for all your hard work and teaching me soo many things!

Quade Masters

1y↑1

I like the drilled holes in the pedal. My pedal was all loosy at the pivot points from wear so I pulled it out, welder a shaft in place then used pillow ball bearings on both sides in place of the metal on metal sliding mechanism. It's very smooth now. I switched to a servo but I'm not happy with it. It has a large dead zone before the machine starts to sew. Seems related to the speed knob. I'm probably going to switch to a brushless setup like yours.

Jude Larkin

Yeah. Sounds like just a bad motor most of them don’t do that. I bet you’ll be happy with a different one that is better quality if you haven’t switched it out already.

loomp

1y↑1

Just got a Juki DLN 415-4. I can't believe how fast the thing is?? It's magnificent, unbelievable really. But I don't want it that fast hahaha, switch the pulley and lengthened the arm that comes off the clutch motor (same idea you had with the holes in the pedal, I might actually doo that too! Genius!) I'll be using it for boat upholstery!

Awesome video!

Eric Strebel

Thanks

2010stoof

2y↑1

I just got an 8700. Got the brushless motor too and also got a needle position sensor that helps even more and should plug right into your controller box. I set it for needle down and will always stop there then push pedal back toward me and it raises needle. Needs some dialing in to make needle up at the right spot where the take up lever is all the way at the top.
Helps with making corners. Can also tap the pedal normal to make one stitch at a time when sneaking up on corners
Bolts right onto hand wheel.
You should look into it

Eric Strebel

Ok, I will, thanks for the comment

garagemonkeysan

2y↑2

Great video and tips. Been wanting one of these machines forever. Mahalo for sharing! : )

Eric Strebel

2y↑1

Good luck in your search

kwithnok

2y↑3

Really neat. Now you';ve got me looking at industrual sewing machines...I live with no room for one of these..one day.

Bruce Kashuba

44w↑1

Very informative video.

I clicked on the link for the servo motor but it came up with a list as opposed to yours. Do you have a model number of yours?? This is my first industrial machine and am seeking your assistance

Eric Strebel

44w

nope, send me to the correct one, not sure what is going on with you link.

MothmanSuperfan

2y↑2

I saw one of these at Goodwill this past weekend and I’m kicking myself for not getting it. Thanks for the info!

Swamp Fox

2y↑1

Awesome video! Lots of great mods. The link for the brushless server motor with controller is dead, but I believe I found the same model.

Eric Strebel

2y↑1

Okay cool, I will update it shortly. Thanks for letting me know

Eric Strebel

2y↑1

Updated the link, should be the same as what I used with the additional outlet on the back for plugging in a light

Swamp Fox

@Eric Strebel Thanks!!

bruno melli

2y↑1

I "rescued" a Singer 111G156. Walking foot and reverse (not all the 111 have reverse)
I made a new table top because the old one was sagging. This thing (plus the motor) is heavy!
For the servo I went with a Sailrite Workhorse. Similar price to most others I've looked at, but with a 2 year warranty.

Eric Strebel

Cool, thanks for sharing, much appreciated.

Joel L

Thank you - very helpful, including so many of the comments below. 👍😎👍

Daniel

2y↑3

Funny thing you posted this as I found a Nakajima industrial sewing machine and was going to sell it. But I decided to hold onto it because their could be useful future projects. Same table and everything.. So hopefully I can get to it!

Eric Strebel

Good luck!

Sara G

I'm a sewing machine junkie. I have everything from the singer featherweight to a 1911 White, all the way up to a cheap crappy Kenmore that does embroidery.
I like to do free motion quilting and home machines just don't cut it. There are a number of semi-industrial machines on the market that so 1500 stitches per minute. But I've got my eye on the juki ddl-550. They're everywhere and they're made in japan. I'm also seeing a ton of industrial machines on craigslist, just like you mentioned for next to nothing. The only thing that concerns me is that giant table. I live in California and we have tiny bedrooms here.

Wilfredo Vargas

2y↑1

I swear you read my mind before you post these videos. Great video, very helpful!

Eric Strebel

😀👍

JON Gergeceff

1y↑1

Wow . I’m evaluating a nice fine now . Thank you. So glad I found your channel. THE STARS ALIGNED. I HAVE TO FIGURE OUT HOW TO MOVE THEM ALL . Third edit to comment . Super duper cool video .

whoami 2020

2y↑1

Very cool Eric. Thanks for sharing.

Designsbyg

1y↑1

i swapped my serger motor for a servo. turned a great machine into something heavenly

Eric Strebel

Yup

Preston Robert

2y↑1

Great for me to know. I sewed for the Army 1968.

blick blick

2y↑2

I have 2 OLD Singer sewing machines a 111W155 ( compound walking foot ) Built in 1945 and a Singer 241-12 Built in 1943 Just a straight stitch ... BUT can sew 1/2 inch of leather! Both of my machines don't have a reversing leaver. Not a problem if you just back stitch by knee lifting the foot and pull the material back . Upgraded to servo motors on both . I got the 111w155 for free ( on craigslist ) it needed work ( a timing belt ) . But well worth it ( even if you have to pay someone else to fix it . I fixed mine ) Both are beasts.... No plastic parts in old machines ! I do Auto upholstery with it .
The 241-12 I use also in Upholstry But also sew rip stop nylon for kites on it .... I tell anyone that will listen that the older the machine the better, Neither one ever breaks.
I also put a smaller pull on the new motors to make it run even slower ....

Eric Strebel

Awesome, thanks for sharing,

Bill Cross

what is a smaller pull ? I have 111W155 and trying to slow it down for leather work, lol

Eric Strebel

Smaller pulley,....... But that won't slow it down very much The best thing is really getting one of these new servo motors.

Fancy

48w↑1

i heard that you could also buy a different wheel size for inside your turn wheel on the right. it will slow it down if you make the size smaller if i remember correctly…

Eric Strebel

48w

Correct but it won't change the ratio significantly, I've tried it it's not really worth it

Fancy

46w

@Eric Strebel can u update an industrial single feed brother to a industrial walking foot if u had someone potentially weld another area for foot or is there more to it then that? thanks for your help. i know about the little walking foot attachments. i just think i need a walking foot to make these hats im trying to make with several layers of polyester and felt layers as stuffing to give structue
the walking foot would help me so much if i can’t i’m just gonna probably update my machine head i guess. also my stupid motor seems to smell smokey when i sew for 10 mins or also if i go slow. i hope it’s just because it sat but i have no idea.

Eric Strebel

46w

Dunno on that one, not likely that you can just mod or make a machine to make it a walking foot unit.

Pat Ogden

46w

Hi Eric, Pat calling from nz. I am considering a singer 491d. Would it be possible to adapt it for free motion quilting? Home use. I know nothing about industrial machines so very grateful for your post cheers

Eric Strebel

46w

Well in theory, you are just replacing one motor for another....so I assume it would work. Good luck

Pat Ogden

46w

@Eric Strebel thanks Eric, appreciate your quick response xxp

Linda C.

Do you have a supplier for different feet for your industrial sewing machine? I have a Consew 230 and I'm looking for a double welt foot. Some websites state their double welt foot fits multiple machines. Just wondering if I need a Consew specific foot. Thank you!

Joe Shmoe

should be standard Singer feet. At least the Walking foot models are all Singer style. They fit Consew, Juki, Seiko, ect

Orla Carter

2y↑1

Thank you great video

The Elle Chanel Show

Hi, I’ve just bought this same machine but when I got it home and plugged it in, it’s tripping my electric! I was wondering if you could have any ideas on why that could be happening?

Eric Strebel

If it's the original motor then something's wrong there. Of course my machine doesn't have any of that original electronics since it's all been upgraded to a brushless servo motor with speed controller.

Eric Strebel

Nicklebak

I have a old machine I’m fixing and I need those caps all over the machine, what’s the name of them ?

Seasonal Frostbite

3:25 I’m confused why you would need to melt the ends of the thread? Is the lockstitch mechanism on the machine broken?

Eric Strebel

2y↑1

Keeps the thread from fraying in the future

AlfredoGrey

1y↑1

I own several industrial sewing machines, all of them are Juki. LU-1541, LU-1508, LU-1508NH, LU1510, LU-1560, LU-2810, LU-1341, TNU-143, LK-1900BN and a MO-6816

Eric Strebel

Cool. Lucky

Nadine Berhart

Whow I've been sewing for 50 plus yrs I've made so much individual orders I've consew flat bed. siruba serger from evening gowns wedding gowns appolsrtry alterations zips jeans alterations I haven't used them much now I had a stroke and can't manage footer properly but it was very interesting on your technique etc

Ronnie harsey Harsey

How do you remove the bobbin holder out of Pfaff Industry sewing machine #497514,and or 1/11W?

Eric Strebel

Sorry, not familiar with that machine, but in general you need to tilt the machine backward to access the bobbin underneath the machine.

Viktor Kyshchuk

Здравствуйте. Вы не подскажите где можно купить швейную машину BROTHER lt2-b838.? Благодарю вас.

Jon Eberle

1y↑2

Beware! Industrial sewing is highly addictive!!

SANG PETUALANG

44w↑1

And it can be frustating too😂

IamDanielle

I’m trying to ruffle tulle on my machine and setting recommendations ?? I put my stitch length at 4 and tighten my tension

Peter

1y↑1

Thanks a tonenne.

SamuelLanghorn

Where do you find $300 old industrial machines??

In California I have not seen anything below $1200 on Craigslist😞

Eric Strebel

Craigslist

Stephen Strebel

2y↑1

Nice.. i will share with master sewer Johanna.. she will enjoy..

Alireza Askari

2y↑1

Dear Eric, Every time i check your subscriber. Something wrong(pretty wrong).You must have hit 1 million sub till now. I hope and every time cross my finger for you. I believe it will happen in this year.

Elaine Dunne

Any tips on a Brother DB2 B791 705 industrial sewing machine. I can’t locate anything on it to thread or anything.

Doris Mays

Can someone please help me thread a singer 842 industrial machine. It has the foot peddle , even that box with press on button like in this video.

Jared Chapin

2y↑1

Do you happen to know in JUKi machines are made by PFAFF. They really look alike

Eric Strebel

Pfaff was squired by haskvarna, then singer group I think and is now Chinese owned.

Joe Shmoe

1y↑1

I think everybody copied everybody once patents ran out.

Sewlistic Soul

I have a Pfaff 335 cylinder arm and every time I try to sew the threads rip or get tangled. It’s not pulling thread up from bobbin…don’t know what I’m doing wrong. Want to finish my bag with it but can’t figure it out…😢 first industrial machine ever. Def have to figure this machine out because my domestic can’t finish my bag seams that are thicker

Eric Strebel

Good luck Make sure you have the needle in all the way and are using the correct needles for your machine

Sewlistic Soul

1y↑1

@Eric Strebel thanks, had to increase the thread to Tex90 said 40-210 online but the 45 I had was shredding. Thicker thread is working beautifully!

Eric Strebel

Fantastic, also sometimes, stuff below the foot gets roughed up and needs to be smoothed out to prevent the treads from getting caught on stuff

Aimee Nielsen

1y↑1

Hi,My sewing machine is a DB-130GM , The top stitch is good but the bottom stitch is a mess,Help please

Jude Larkin

It’s probably your bobbin tension. Your bobbin should have a little tension screw on it. As a general rule, the bobbin tension should just support the weight of the bobbin if you holt it by the thread. Moving your hand up and down should cause it to let thread out. Also make sure your needle is turned the right way. It should hav a flat spot near the eye that needs to face the bobbin. I’m sure there are videos that explain that better. If adjusting the bobbin doesn’t correct it, there is a chance there is an issue with the timing. It’s possible to fix that yourself but if you’re not confident it’s best to take it to a well rated repair person.

Saimo BoOm

Nice Erick!
I want ur help in a mold project how can i contact you?

Eric Strebel

Go to about on YouTube, then my website

Messenger

46w

The thing you missed was mentioning the walking foot machines. They are way better than this.

DL Rung

2y↑1

I just got a Singer Model 2961 D300A and can't find out alot of info on it .could you assist

Eric Strebel

Sorry, zero experience with singers

Illustra Rica

2y↑1

Ending song from The Mandolorian?

Eric Strebel

2y↑1

Correct

rndea100

47w↑1

i wana slap a sevvo on my vintage 206k 0r 319k

jensmaa

2y↑1

your eyebrows are mesmerizing

Eric Strebel

Lol, mad professor eyebrows!

Seymour Wrasse

1y↑1

I wanted one of these back in the 70's when I got in to leatherwork. they cost $8-900, my first car cost $650, needless to say.. But I got a consew a few years ago, for a couple of hundred, putting a servo motor on it this spring,

Dmm Dmm543

2y↑1

You are a very mean man ! You're like a drug pusher. You are painting a rosey picture and giving out free first fixes. You are purposely leaving out the dangers of getting an industrial sewing machine. You are conveniently leaving out The fixation, the addiction, the need for more and the ability to satisfy any sewing whim. Luckily, after owning 15 industrial sewing machines I have finally satiated my addictive needs. You really should warn the fledglings about what they are about to get into, they don't know what they don't know.