There are seven artists by the name of Rise:

1.)Rise from Macclesfie… Read Full Bio ↴There are seven artists by the name of Rise:

1.)Rise from Macclesfield, UK is a producer and musician currently recording for the Futuristica Music label. Rise has worked with and produced for artists such as Deborah Jordan, Replife, Jazz Chronicles, Low Budget Soul, Beit Nun and Spinnerty to name but a few. In 2011 he released his debut L.P. 'Messages'.

2.)Rise from Los Angeles, California formed in 1993 and is a death metal band with some black metal influences that appeared on their third full-length. The band is still active and so far they have released one demo tape and three full-length albums (as well as a new album forthcoming.)

3.)Rise hails from Brooklyn, New York. An underground hip hop artist who has released two albums and has appeared on a few compilations. Known for his witty wordplay/punchlines, complex rhyme schemes, and smooth flow.

4.)Rise from Los Angeles, California formed in high school in '77 and were a punk rock band. They auditioned sophomore Tom Araya [Slayer] as a bassist, but his mom decided they'd be a bad influence on him. The first three Rise singles came on colored (and sometimes shaped) vinyl.

5) RISE was formed in the summer of 2003 by Craig Junghandel (vocals), Mark Schiesl (guitars), Jason Roberts (bass), and Ray Rocha (drums). The band, located on the California Central Coast, combines professionalism and musicianship, along with an infectious amount of energy and enthusiasm. Their material consists of songs spanning the last five decades, and includes everything from Al Green to Iron Maiden, though high-energy hard rock is regarded as their specialty.

6)Rise is a largely celtic-influenced alt.folk band from the Island of Bute on the Scottish West Coast. Known for the high degree of musicianship on their albums, their music has been described as eclectic, original, inventive, very musical and highly evocative.

7)Rise are a four piece originals band based in West Yorkshire, UK. Their music draws upon influences ranging from Soul/Funk to Rock and (a little) Jazz. It has been described as easy to listen to, un-offensive, and chilled!

RA SPEAKS
Rise Lyrics

We have lyrics for these tracks by Rise:

All I Have I feel the hunger Down in my soul A hole deep inside…
Center Of My World A kick to the head, a punch to the face,…
Imagine Imagine there's no heaven It's easy if you try No hell below…
It Doesn't Matter I'm just looking to curve this false perception Before the w…
Meet You Lost in this world Hope almost gone Rest on your nest No tom…
Rise Although I walk through the valley of the shadow of…
Shine A Light Hide in Your arms Like a baby-child Safe and secure In the s…
Sunday The years unfold in one moment The voices that we heard…
The Fallacy Of Retrospective Determinism Heads Bounce to a fesh pulse, A rise up rhythm, An uproar…

The Single I'm tired but I can't sleep Cause when I'm awake I'm daydrea…
THE TRUTH Never seen faces, never heard lies Limpid phrases,…
The Wickedest Flow (talking): That's right...Rise...yeah, it's me again... …
Thinkin About You I feel like I've known you for a lifetime When we…

Welcome To The Real World You wrapped your hand around my finger Sticks to the unknown…

The lyrics are frequently found in the comments by searching or by filtering for lyric videos

TRACKS

No Related Genres

More Genres

No Artists Found

More Artists Load All

No Albums Found

More Albums Load All

No Tracks Found

01Shine A Light (Intro)0:39

02Messages Pt.14:05

03Psalm 645:03

04THE TRUTH2:55

05DUSK ON THE SUDAN3:59

PT2M

10PRAYER FOR LOVE4:22

11Eastern Sermon1:54

12SHINE DOWN3:50

13In Those Days....0:58

Genre not found

Artist not found

Album not found

Search results not found

Song not found

Comments from YouTube:

@joehiden7475

2y↑4

I just bought one and could not be happier with the feel. Feels very solid. I would argue this is much better than a full auto as you demonstrated. It is just right and does not waste

@deleterious_tactical_7024

3y↑3

I run RA-434 on my recce build and a blitz trigger in my 10.3” build before I had my rare breed trigger in my 10.3” and they are amazing triggers. I also run a Trigger Tech independence competition trigger in my 300 blackout and it is awesome as well but nothing beats my RA-434 and Blitz triggers.

@redohe9508

2y↑2

I have one of the 535 triggers and really like the workmanship and fit and finish. Great trigger.

@Chelanwechel

3y↑20

I love my RA-535 trigger! It's more like pushing a button than pulling a trigger.

@ourlifeinwashington4114

2y↑4

I love Diamondback firearms, everything is made in-house and fits perfect unlike many ofthe higher end ARs that outsource out of their firearms. I have this same trigger and ,ove it. Great video and new sub.

@GBGuns

2y↑1

Welcome to the channel! Most of our videos are part of articles for various websites, and we split tabletop and range into two separate videos, so if something is missing check the pinned comment.

@Ghandimw2

3y↑5

Installed mines yesterday and it's even shorter pull and reset than what you displayed. The reset distance especially feels non-existent, happens immediately.

@tilleypatrickpt

2y↑2

OK, I knew I was going with RA for my trigger, but this just sold me on which trigger I will be putting on my ar-47 build. That fire control was a thing of beauty!!!

@GBGuns

2y↑2

This trigger does have a tough time with some of the military primers on steel-cased 7.62x39, so make sure you have an enhanced firing pin for your AR-47

@tilleypatrickpt

2y↑1

@Graham Baates will do! Thank you for the info

@BrotherTeddyYahSavedMe

2y↑1

😳Wow...I'm definitely putting this in my MK18. Wish they had something like this for my Galil Ace Gen2 7.62x39 Pistol.

@timfixinstuff2283

2y↑1

Good video, makes me think I am gonna need one of those after all.

@joshchandley9242

2y↑2

I love mine, but it has developed a little bit of side to side slop. Hopefully they'll replace it.

@portcityengineering

Any update on that, Did they replace it? Also how many rounds shot before you noticed the wear?

@ETJMF97

40w

I have a 535. Mine is different from yours. Not sure how but it has a 2mm pull like other 535 but whats weird is mine resets at 1mm. You barely feel it go into reset except the click. I about sent it back when i received it a few years ago. It seemed used and the package was damaged. But after talking with RA it was confirmed not used. So glad i never got rid of it. Never felt another 535 thats the same.

@rewardlawnmaintenance

22w↑1

It seems like they are all different. I just watched a review that had a chart behind the trigger and it showed exactly what you’re talking about.

@Actual-user

2y↑1

The DB you start the video comes with a awesome CMC 3.5lb singe stage. Would you say the RA535 is better?

@johnday4883

45w↑1

Yep have that trigger in my AR-15 it is badass RA-535

@specialk5070

RA 535 - 8” Wilson combat barrel- piggy brake 🔥🐖-young manufacturing BCG/NM- just fer starter’s and it rock -n-roll’s FREEDOM 🇺🇸✊ keep shooting everyone ❤

@nicon53204

3y↑5

i love mine. the guy at the gun range though i had a bump stock on my ar im like no thats my trigger.

@karlki8

3y↑1

I like the 535 trigger except for how it looks. I still prefer triggers that are "curved". Triggers that are "straight" or "flat" are just not that appealing to me for some reason. Do you know if they have that same trigger but looks like the GI trigger, "curved" trigger?

@GBGuns

3y↑1

Yes Teya has one in her custom build. It's not a 535 but it is a Rise trigger

@karlki8

3y↑1

@Graham Baates is it as smooth as this one? Or very close?

@GBGuns

3y↑1

Yes, excellent trigger, slightly longer pull and reset, but much better than a factory trigger

@karlki8

3y↑2

@Graham Baates thank you so much! Then, that's what i will be looking into!

@plainandsimple1

RA 434.

1 More Replies...

@seangoulden

Do you have any more videos of you using this trigger? Not necessarily displaying, just wanna see more action of it.

@GBGuns

We haveanothercom8ng where we use this lower to test an upper.

@josecook1

3y↑1

I wonder if this will fit on my b&t apc9 pro....I do know some ar triggers do work

@Veldtian1

At 1:45 and 2:42 you make these salient points that are never usually articulated in discussions regarding the utility of high end trigger systems. It's not just about some gun snob issue.

@GBGuns

and not just about speed either. This is why in the pistol reviews I stopped measure pull weight. A good "feel" is FAR more important than pull weight. Even travel distance can be ignored sometimes depending on application and shooter skill.

@Vtwin60

Mine had to go back due to not resetting. RA was great in replacing it but I had less than 400 rnds on it.

@rl4416

the pre/over travel and reset is the reason im in for one . there $139 at a few places

@mooredefense4625

Where did you find one for 139?

@rl4416

2y↑1

@MOORE Defense Battle Hawk Armory

@mooredefense4625

@R L wow i literally have been seeing them for $209.. you sir are the man 🤘🏾 appreciate it

@redohe9508

I don't want an automatic because of the artificial inflation market of ammunition now. I would rather have a nice semiautomatic trigger so rounds aren't wasted and precision to make a good shot.

@MiguelAngel-ji9yl

Im wondering how difficult the install of this trigger was

@GBGuns

2y↑1

Very easy. YouTube won't let us show it, but it's very simple

@StevenL00

3y↑2

is this both an ar15 and ar10 trigger? is it intended for competition or duty/general use since it's so light?

@VZBudgetBuildz

25w

It’s a heavy duty comp trigger, it’s both tbh, it’s beefy and coated with a special coating that makes it super slick. I thought the trigger needed cutting on the hammer to work (I was new, still am) The trigger is a UNIT, completely CNC machined, with the springs internally housed in a casing. Def pick one up.

@H20H20

I want this trigger but not sure if it would fit into my ar15 5.56 Saint Victor.

@GBGuns

3y↑1

I don't see why it wouldn't.

@mrshort2379

I just want to iterate and I am not tying to be a troll, but the trigger i have pulls and resets just as good as that RA 535 trigger. I outsourced my trigger parts from a couple different companies for way less then what the RA 535 cost. now the RA 535 looks better and may have a little lighter pull. I do not know, because I do not have a trigger pull scale, but I used JP springs and an Anderson Mfg SS hammer with a Bull Moose Tactical flat faced trigger polished up. and it is darn near as good. mine just ain't as purdy as the RA 535, but I have to say the RA535 was my inspiration for my trigger build

@jrbailey3208

3y↑2

Graham.......do they make that for the AK series?

Cheers from the Oil Patch in Central WY

@legaspiaudio9830

Would this trigger work for long shot or woukd I need a 2 stage?

@GBGuns

2y↑2

That's up to your personal preference and training.

@gguimaraes2002

49w

Which one do you prefer the 535 or cmc flat 3.5 lbs?

@GBGuns

49w

They're both great triggers, it depends on what you want to do with the rifle.

@gguimaraes2002

49w

@GBGuns for a 11,5” 556 rifle with a lpvo and a holosun offset. Sometime a precision shot of 200 yeards.

@GBGuns

49w

@Gustavo Guimarães You may find the CMC allows for a little more control. The 535 is a go-fast trigger and is tricky to be slow with.

@gguimaraes2002

49w

@GBGuns what about the hammer finish? Cmc in black oxide and the 535 is a teflon or other coating. The 535 i think you have a more premium feel…isnt it?

@GBGuns

49w

You're getting into the nuances of personal preference.

1 More Replies...

@pilotmiami1

Bravo

@TheRedrich28

Will it fit into a Aero Precision M4e1 lower?

@GBGuns

3y↑1

Most likely

@ahumm8280

2y↑1

It fits perfectly!

@HungLe-rt5hp

Some segments in the video are stamped not adjacent to each other

@BadEye3621

What stock does he have???

@GBGuns

Who?

@StevenL00

3y↑4

1:52 annnnnnnnnd that was a gold mine worth of ammo (jk, thanks for showing that)

@GBGuns

3y↑2

Having it on video made it enjoyable for the future

@steffensamlal1854

I installed this 535 trigger in my ar rifle and it fires with the safety on, any taughts on why that's happening ?

@GBGuns

3y↑3

The bar of your safety may be upside down/backwards. It's easy to do by mistake on bars with removable switches

@anthonyrivera9483

Will this trigger work on a 556 model to i read the description and said it compatible with most 308 and 223 models but didn't say nun but 556

@GBGuns

Yes it will

@johnbuck9536

I wanna throw one of these into my .50 beowulf and take her for a spin.

@pilotmiami1

Bravo.thenks

@wwclay86

3y↑2

I spy the armson oeg gunsight...

More Comments

just now