SOFFet is the duo of GooF and YoYo. They released their first album in 2003… Read Full Bio ↴SOFFet is the duo of GooF and YoYo. They released their first album in 2003 and are signed to rhythm zone Records.

YoYo (right / .8.19 was born in'80 / songwriter sound produced) and GooF (left / was born in'80 .6.28 / lyricist) 2 MC men from the unit swing lap. 小学校6年からの友達である2人は、95年15才の時にSOFFetを結成、独学で作曲を始め、98年には若干17才で某メジャーレーベルの全国オーディションで見事最終審査まで突破。 Sixth year of two friends from the 15-year-old in 1995 when SOFFet formed, self-taught composer, and a 17-year-old in 1998 was slightly in some major labels nationwide audition spectacular breakthrough until the final examination. 翌年、YoYoは渡米し、アメリカのバークリー音楽院にて修学。 The following year, YoYo will visit the United States and American studies at the Berklee College of Music. その間、GooFは日本でのライブ・制作を中心に音楽活動を続け、着実にファンを増やしてゆく。 Meanwhile, GooF live in Japan, mainly in music production activities continue to increase steadily-moving fan. YoYoが帰国後、02年7月にミニ・アルバム「ソッフェのぽかぽかミュージック」をVIBLE RECORDからリリース。 YoYo will return home after the July 1902 mini-album, "Music SOFFE the Pokapoka" VIBLE RECORD released. 好調なセールスを記録し話題盤となり、03年3月、メジャー・デビュー・シングル「君がいるなら☆」を発売。 Strong sales and record the panel discussion, in March 1903, major debut single "If you're ☆" release. 同年8月にリリースの1stアルバム「Carnival」はオリコン・アルバム・チャートで初登場15位をマーク。 In August the same year, 1 st album release "Carnival" is Oricon chart debut album to mark 15th. 04年8月リリースの2ndアルバム「SWINGIN'BROTHERS」では、ジャズ・クラシック・ロックと様々なジャンルを取り入れ、歌とラップを自由に行き来するオリジナリティー溢れるクオリティーの高い音楽性を示した。 August 1904 release of 2 nd album "SWINGIN'BROTHERS", the classic rock and jazz to incorporate various genres, rap-singing and originality freely back and forth with the lively music of high quality.

05年8月にはSOFFet初のコラボレート・シングル「GOOD MORNIN' GOOD ROLLIN'」を佐藤竹善&SOFFet with "No Name Horses" Directed by Makoto Ozoneとしてリリース。 SOFFet in August 1905 to collaborate with the first single "GOOD MORNIN 'GOOD ROLLIN'" Take a good Sato & SOFFet with "No Name Horses" Directed by Makoto Ozone was released. SOFFet、佐藤竹善、小曽根真によるPOPS＋HIP HOP＋BIG BAND JAZZというノンジャンル・ノンカテゴリーのコラボレートを実現した。 SOFFet, Sato bamboo good, true-小曽根POPS + HIP HOP + BIG BAND JAZZ non-genre category of non-realization of the collaboration.

その音楽にはアーティストからの評価も高く、04年の平井堅アルバム「SENTIMENTALovers」収録の「言わない関係」にコーラスでゲスト参加。 The music of artists from the higher rating, 04-year-Ken Hirai album "SENTIMENTALovers" included "say relationship" with guests participating in chorus. 後にその平井堅氏からの紹介でフジテレビ系「笑っていいとも！」のテレホンショッキングにゲスト出演した。 Ken Hirai Sono, who later introduced to Fuji Television, "You're laughing!" Shocking phone guest performer. さらには05年11月のCHEMISTRYアルバム「fo(u)r」収録曲「believin'」の作詞を担当、06年7月のSMAP最新アルバム「Pop Up! SMAP」では作詞・作曲「星空の下で」を楽曲提供。 November 1905 as well as the album CHEMISTRY "fo (u) r" songs "believin '" in charge of writing the song, 06 July SMAP latest album "Pop Up! SMAP" songwriting, "under the stars "To provide music.

06年8月30日にはrhythm zone移籍第1弾シングル「everlasting one」をリリース。 August 30, 1906 is the first single transfer rhythm zone "everlasting one" was released. 共同Sound ProduceにFantastic Plastic Machineを迎え話題となったこの楽曲は全国FM局で好反応を呼び、週間OAチャート第1位を記録した。 Sound Produce a joint Fantastic Plastic Machine to pick up this topic and the songs are good nationwide FM radio station in response to the call, OA-week chart recorded the first place. 11月15日には珠玉のミディアム・バラード「Life」をリリース。 On November 15, is the gem medium ballad "Life" was released. この楽曲への高評価から、テレビ朝日系「MUSIC STATION」や2度目となるフジテレビ系「笑っていいとも！」テレフォンショッキングゲストをはじめ数々のTV番組に出演し、スマッシュヒットを記録。 This high rating from the music, TV Asahi series "MUSIC STATION" and second to Fuji Television, "You're laughing!" TEREFONSHOKKINGUGESUTO including numerous TV programs and recorded a smash hit.

07年1月17日には約2年半ぶりとなる3rdアルバム「ココロフィルムノート」をリリース。 January 17, 1907 for about two and a half years 3 rd album "KOKOROFIRUMUNOTO". 参加アーティストにスキマスイッチ, Fantastic Plastic Machine, 佐藤竹善/小曽根真/No Name Horses, GAGLEを迎え、ソッフェサウンドの最進化形とも言うべき楽曲群は傑作アルバムとして各方面からの話題も高まった。 Sukima Switch to participating artists, Fantastic Plastic Machine, bamboo good Sato /小曽根true / No Name Horses, GAGLE to welcome the most advanced SOFFESAUNDO music groups also say the album as a masterpiece in every direction from the topic will increase. また5月末～6月末にかけ、「エイジアエンジニア/SOFFet ～TOUR'07～」として全国19ヵ所にわたるエイジアエンジニアとのジョイントツアーを大盛況のうちに終了。 In late May to late June between the "engineer asia / SOFFet ~ TOUR'07 ~" There are 19 nationwide as a joint tour of Asia and engineers to the great success of tomorrow.

キングコング梶原雄太主演のドラマ風PVが話題となった7月18日リリースのシングル「Answer」は力強さ・メッセージ性のある歌詞と流麗なメロディでUSENの問い合わせが殺到し、リリースから約3ヶ月に渡りUSENチャート TOP20上位にランクインし続けロングセールスを記録。 King Kong-style drama starring Yuuta Kaziwara PV The first single released July 18, "Answer" is a message of strength with a flowing melody, lyrics and USEN been flooded with inquiries, the release of about 3 months USEN has been placed high in the charts TOP20 Long continued to record sales.

11月14日にはSOFFet史上かつてない程に直球のラヴ・バラード「Love Story」をリリースし、12月にはそれを引っさげての「生はお好き? つあっ! つあっ! ツアー!!!'07」(チケット即ソールドアウト)を大阪・東京にて開催。 November 14, 2006 is unprecedented in the history of SOFFet fastball away to Love ballad "Love Story" released in December, it引っさげthe "raw do you like?-Ack-ack tour! ' 07 "(tickets sold out immediately) to be held in Osaka.

その幅広い音楽性でのライブはDJスタイルからアコースティック、さらには自ら楽器を弾きながらラップをするというオリジナルなスタイルを持ち、上記ツアーからはSOFFetオフィシャルバックバンド【東京Junkastic Band】を結成するなど、生のセッション感溢れるSOFFet独自のエンターテインメントを追及している The wide range of live music from the DJ-style acoustic, guitar and even his own instrument laps in the original style and above SOFFet OFISHARUBAKKUBANDO tour from Tokyo Junkastic Band [such as] form a fresh session SOFFet lively sense of its own to pursue the entertainment

Off The Hook
SOFFet Lyrics

この業界上史上最強
SOFFet の巧みな脳細胞
生かされ築かれた作品で
爽快の状態を All night long
まるで気分はマイアミ
そして俺のリズムサイバーチック
ハンパないマジック
魅せるダイナミックな
ライムで会場は大パニック
愛相当込めた

大音量の音でお届けナイトショー
ハイどうぞ騒いどこう
お先に俺らは最高潮
かなりのテクニック持った
MC's check this!
みんな声を揃えて歌うべき
How many people 調子 Good?
Are you ready? 手は真上に
LaLaLaLa LaLaLaLaLaLa...
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook
行くぞ!パーティータイム
踊れダンシングナイト
俺は段違いなほどダンディーガイ
まるで三次会のような勘違い
起こるぐらい飛び切りのハイになる
明るくなるまでのれ YO! BROTHER
そこの夜型の姿超グラマー
ちょっときなよワイルドな娘集合
教えるぜマル秘テク55吼えろ
ウォーこんぐれぇの声で
イェー挙げろ!その右手
よって来なよマイクロフォンショー
ついて来いよ All night long Yo!
ホラ起きな動きない奴等はどきな
デストロイヤーゴリラのノリだ
止まる事無くさぁ行こう
君のエンジンいったい何気筒
吐き出すハンパじゃない排気量
靴はナイキのシューズ最新号
常に飛ばしながらステップアップ
SOFFet をみんな Check 1+2
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook
頭から足の指先まで
鳥肌立つお前のまじかで
ぶちかます不器用でさじ加減も
知らねぇいったれー!
ラップマシーンだぜ!!
退屈すぎて大仏み
てぇになってる奴にバイブス
送る怪物
マイクスルーしライヴする
どんな困難な状況もかいくぐる
揺れろとりあえず
連れと盛り上げる
フリーパートラップ演奏
ちょいとここでアップテンポ
感動的な劇だ脳を撃打する
劇団はマイク持った手には
手品秘めたエンターテイナー
どうだ皆さんのって頂戴
超ハイな状態 It's a show time!!
トコトコと踊れ男共
はしゃぐ女の子まるで子供の様
ここで楽しまなきゃ元も子もないぜ
今日も SOFFet の音のもと
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook
いかれた MC は独学
いかした DJ は On the Booth
とびきり最高の音楽
この曲がまさに Off The Hook

Lyrics © O/B/O APRA AMCOS

Written by: YOYO

Lyrics Licensed & Provided by LyricFind

To comment on or correct specific content, highlight it

TRACKS

No Related Genres

More Genres

No Artists Found

More Artists Load All

No Albums Found

No Tracks Found

04Real 俺 Shit! feat.Maco

05食卓

06Off The Hook

SOFFet

07Epilogue ～Endo Role～

Genre not found

Artist not found

Album not found

Search results not found

Song not found

Comments from YouTube:

Max Speed

3y↑24

This is exactly what I was looking for. I recently bought my first house and it doesn’t have any soffit vents on it. Only plywood at around 15 degree angle with 4 vents on each side, front and back. This video made it not seem so hard for someone who has no idea on any sort of remodeling. Thank you!

Alex Wyman

1y↑1

this is not a great reference guide from someone who does this for a living

Gonpachiro

32w

@alexwyman741 I'm replacing mine, can you point me in a direction of a video of someone who does it well in your opinion?

How To DIY & Save A Dime

2y↑3

So simple and straight to it. I love how clean and professional. U do not make people feel intimidated by your teaching method! Loveit👍🏽💪🏾

linda heatherly

3y↑6

This is a great video! I’ve had to rebuild things a handyman did wrong- or finish jobs because the next guy doesn’t show up. From now on I’ll just YouTube and do it all myself! Thank you for this one- birds are pulling out insulation or nesting inside because my guy just can’t seem to get back for 2 weeks to put it up. I’ll do it myself now that I see how!!

Pikeville Seventh-Day Adventist Church

I am a first-time-Soffitt installer (DIY). Your instructions were clear and more helpful than other videos I viewed. Next I start vinyl siding. I hope to learn from you again.

pmdub806

29w

Very good. I like keeping it simple this is exactly what I needed to see. Now I can do it on my own. Thank you. 👍

Russ Hersman

4y↑1

That was a simple, but complete explanation. Exactly what I was looking for.

bkbkbk828282

4y↑3

Really clear, concise, and straightforward video. Thanks for the help and for your service!

Kevlar 45

3y↑2

Wow, that was a lot more simple than I thought it would be. Thank you

sandra hanmer

2y↑18

Thanks for the demo. I have been trying to find a contractor to fix mysoffits, squirrels have ripped them out but no one wants to do small jobs. I,m pretty good at doing repairs myself For a retired woman and now I’m going to do it.

A Weston

So true. It’s challenging to find anyone to do small jobs right now

Southern Belle

28w

How did it go?? Give any additional advice or tips? I’m learning to be kinda handy myself

Bella Grace

4y↑1

Great video, I never knew replacing fascia board could be so easy.

Frank M

4y↑2

Great job!
Clear, concise and well done 👍
Appreciate your hard work.

The Remodeling Veteran

4y↑2

Frank Maffei Thanks Frank. Appreciate the kind words.

mwolfe1875

Thanks for the video! This is a huge help. One question, you didn't use a soffit panel. isn't this vulnerable to birds and other small animals? I'm trying to figure out how to attach the soffit panel but if I can do without then it would be a whole lot easier.

CaTeGoRe BattleToad

4y↑1

I'm installing PoE cameras through my soffit. I wanted to see how this was constructed in case I botched it beyond repair. Awesome video!!

Michael 732

Me too.

Barbara Hughes

3y↑5

It would have been nice to see a picture of the screws you used. Definitely looked easy enough. However it didn't show how to cut the facia if your existing board is a 2x4 instead of a 2x6.

Debra Armstrong

4y↑3

As a new property adjuster, now I know! Thank you for this video. 😊

Jeff DeLaunay

4y↑31

Nails would be much more cost effective and regardless of what type of fastener you use it shouldn't be snugged. That negates the whole expansion and contraction you spoke of. Also, your fascia trim has nothing securing it at the top. Normally this would be tucked under drip edge which I get you don't have due to the metal roof but the VSI recommends using utility trim or, if you have to, face nail it. Lastly, NEVER should you put your screws (should be trim nails) through the fascia at any other point than the v-groove of the soffit panel. You put them smack dab in the center of the vented section which compromised its integrity and will cause it to fail faster, not to mention looks bad. It's cool that you're making videos to help people but you are doing it wrong. That isn't just my opinion that is according to the Vinyl Siding Institute who is kind of an authority on the subject.

Bd Guys

2y↑2

I am not a carpenter but I was hoping for your correcting comments . Thanks .

Sharyl Weisel

QUESTION: if your using a blade don’t you need to turn the blade backwards so it doesn’t break the vinyl????

1 1

@Sharyl Weisel snips

joey florida

1y↑3

@Sharyl Weiselput the blade backwards on your Circular saw, so you can cut 5 at once

Mr Jones

1y↑1

1 thing about nails tho, it slide back. Screws would be better for me. Oh plus a lot of people can hammer good bending nails. Js

2 More Replies...

Nelson Lueiza

good video! simple, right to the topic, no big annoying logo introduction, background music at the right ratio, then the content, clear, simple, right to the point. good job, I'm subscribing.

The Remodeling Veteran

4y↑1

Nelson Lueiza Thank you my friend. We’ve been away for awhile trying to settle into new positions at work. We plan on trying to get a video out this week. Thanks for the support. Take care, and god bless!

Vintage, The Band, Toronto

Thanks for the demo. I've installed mine and it looks great. Thanks.

dave wave

Good real world demo. Thanks for taking the time!

Delawares Realtor Nick

THANK YOU! finally a video of actually installing them. So many others had that title yet none actually showed it well. Yours showed it perfectly 👌

The Remodeling Veteran

4y↑1

Thank you my friend. I'm truly here for you guys! Just another guy trying to relay information to the public!

Marc Dupuis

3y↑8

I notice you say you cut the soffit short to allow for expansion and contraction which I totally agree is a good idea. Then I noticed you put screws in the valley of your soffit material which doesn't have a slotted hole and you put the screw in tight so that the soffit can't move, the same with the screw you put in the manufactured edge which does have a sotted hole. So my question is should it not be fastened using the slotted hole and maybe make another hole in the valley to allow it to expand and contract??

Log Cabin Man

You are correct

Samurai_FK8

Great video keep up the good work. The whole barn build is giving me a heads up I’m residing my home.

golsonkp

Hey y’all. So my father and I are going to install soffits in our home, but also new insulation. We were wondering if the insulation might hurt the air flow. We were thinking about Jerry rigging pbc piles high enough through the soffits to bypass any insulation to avoid blocked airflow. Also small fans on our roof. Should we go for less soffits to avoid hot air accumulating more than the fan can push out? Watch y’all think?

Also, Thanks for the video man.

Brent Ellis

42w

I don't know if you've already finished this project six months later, but here goes. It's better to have too much air intake in soffit than not enough in most cases. When you've determined the amount of soffit ventilation you're going to have, you need to run a rafter baffle (channel for air) in each of the rafter bays that has a soffit vent. If your insulation is going to be deep enough (R-60 is roughly 22" for fiberglass) or your roof pitch is too shallow, one rafter baffle will still be buried by the insulation meaning you'd have to add a second rafter baffle to each to make sure it's clear and that the wind outside won't 'wind wash' your insulation. As far as the roof ventilation, I use turbine roof vents (whirlybirds) in most applications but if there's low wind you could look into a solar, electric, solar/electric hybrid, or static vents (I think they're called static roof louvers) These each expel different amounts of air but will usually give you a ratio of intake/outtake needed for optimal performance. I have two 800 sq ft attics, for each one I have two 12" whirlybirds that do a great job at keeping the heat down. I hope this helps

Christopher Dekonstrukt

47w

The sides of my house were done in soffit; it's not meant to shingle water like siding does. I have Masonite soffits and the support at the top of the wall is all termite eaten so I'm looking at replacing all of it. I like the vented. I'm going to put new siding on because I need to replace the Masonite lap board on the walls with OSB.

BigShash

2y↑1

Had a bit of hurricane damage here in Florida...12 ft section of fascia was ripped off winds...thank you for the instruction (I subscribed immediately)!!

Vic Timmons

I have same hurricane damage in SWFL. looks like step one is to remove the existing fascia. I just have random mangled soffits do I need to take a whole section out and start over?

Vic Timmons

P.S. my soffits aren't screwed in or they probably wouldn't have blown out

Mike Hammoud

Thank you for this easy instructions. It relieved me because I never know how to do it before. Thanks again.

Antonio Ric

Straight to the point, awesome. Thank you

Will

Thank you! Your videos helped me do my house and I am truly grateful save a bunch on money

George

4y↑5

Thank you for such a good video. This really helps with what I'm getting ready to do. Thank you.

Ashton Dukart

Thank you for the video. It helped me see exactly how to do it. I would have just installed the whole length as one piece going sideways. But now i know. Lol

VikingPreparedness

1y↑1

Thanks, Brother- I needed this info and you made it simple.

MayfallTribe

Wow imagine seeing pastor Joe in the comments of a soffit video. Heck ye.

Ron Mahon

37w↑1

A little late now, but the reason they put ELONGATED HOLES in vinal siding is because it expands and contracts like crazy . DON'T NAIL IT REAL TIGHT !

Louis Hudson III

Very helpful and easy to follow

Roz Shird

Great, just what I had in mind. It replaces using wood.

Mee How

Agreed, this guy makes it look easy and fun actually.

Lee L

4y↑1

Thanks things changed alot since I been in construction and watching this helped me get updated on new material out there.

The Remodeling Veteran

4y↑1

Lee L Thanks my friend. “My way” may not be the gospel, or so to speak, but it’s always worked for me and I’ve never been called back to a job. Thanks again my friend and I hope to see you in future videos

Ottawa Guy

3y↑2

Just a thought. When screwing up the soffit, skip a channel every once in a while. Keep track of where the blank channels are to put your fascia screws in. Very annoying when you hit a screw in the soffit when you are doing the fascia.

Ryan Glawson

39w

What? That’s why you don’t put a screw where the channel is. Plus putting a screw where the channel is will make the aluminum bend into the channel if you do that. You screw into the flat part of the soffit so that it stays flat🤦🏽‍♂️🤦🏽‍♂️. Just a thought.

Ann Brown

Where should your attic insulation begin/end in relation to the soffit ?

Jeffrey Santaite

Not sure what part of the country you are in, but I have a client who wants this done to one of her rental properties. I am considering doing the job for her after trying to figure out what all is involved. It doesn't seem to difficult. Any idea how to price this out? Her house is roughly a rectangle. 60' x 30' Also, do you simply cover up the existing vents? Thanks

Kiera Lucich

This is exactly what we were looking for. Thanks! Do you recommend a particular blade for sawing through soffit with a miter saw?

ChiBears98

More teeth the better

P Evers

3y↑1

Thank you. Explained very well. Nice a simple and to the point. I am going to do some soffit work with confidence. Please do a video on how to take soffits down without causing damage. Thank you and God bless you also.

Rick L

2y↑1

Would have been nice to show starting the install with the first piece. Thanks for posting.

what's next?

41w

Note that this is not installed per manufacturer specifications and does not permit for proper expansion and contraction of the vinyl. This usually results in noisy siding/soffit material , especially after very hot days as the materials cool off.

Dulce Hogar By Veronica

Thank you for your video! Very helpful!

Michelle White

Is it okay to wrap the preexisting wood soffit with aluminum soffit panels?

Wilson Portugal

35w

Thanks. You made that a very simple to understand video.

TD Anderhen Properties

Fellow vet here. Nice work bro! This was helpful

Michael Elko

I can't wait to try it!!

Tracy

Those is how you do a video. Give the relevant info and speed up the rest. Thanks, I think I need to use this method instead of what I was going to do. Much easier!

David McPeak

Excellent Video - What type of screws do you recommend?

Jackie'O

Looking for this Thank you so much!!👍👍🙏🙏🙏

Dan Hillegonds

5y↑1

To the point, and focused. I subscribed.

The Remodeling Veteran

Much appreciated. God bless

ronbronb

4y↑1

Is it possible to replace the soffit without removing the fascia trim?

Candy Davis

This is awesome! thank you!

Evelyn Mathis

4y↑1

Thank you, well explained. What type saw are you using to cut soffit?

The Remodeling Veteran

4y↑1

I use my miter saw to cut them with a 60 tooth blade! Thanks for the comment my friend! Take care and god bless!

Paul Hagan

4y↑5

Wow. 3 screws in a 12 inch panel is WAY overkill even if you live in a really windy area. Not to mention snugging each screw will NOT allow for expansion despite his earlier comment.

Justin Kurek

Yeah I always put 2 in each panel.. and leave the soffit joints free UNTIL I screw the fascia on. Then I put a screw where each soffit joint is. But hey, to each their own

GSC

Great vid...from start to finish 👍

The Brostv2565

Question, what screws are you using to secure the soffit? I ask the pro because I'll get the guessing game at the local home improvement big box store.

The Remodeling Veteran

I use self tapping wood screws with a rubber washer seal. Commonly referred to as pole barn screws.

JfJonesMobiles

4y↑12

Why didn't you show the most difficult part of the soffit job. The last far right side piece? How does it terminate at the end?

FICMRepair.com

5y↑8

Why is it so important to install the fasteners into the 1" expansion slots and to hold the soffit back 1/4" from the f channel for that same purpose only to then install the two the screws into the two valleys without first installing/creating slots for the screws to ride in? Similarly, why install the screws so tightly - why not leave some room for the soffit to slide in and out with contraction if the goal is to allow movement? Or is it that across that 11 1/4" there won't be enough expansion to worry about?

ChiBears98

3y↑1

Was thinking the same, he must not be in an area that gets a lot of wind, his install isn’t exactly how you should do it, you need to use the holes on the flange...

Nonc Ched

I never put a screw on the ends either, just in the slots and dont tighten them all way the down. However, i have a 1x4 on edge agaibst the house that i can get a 2nd screw into.

Snow Popis

28w

Thank you , I needed this!

Shane Audette

Great video. To the point, grey footage. Great hints. Thanks.... doing a shed

The Remodeling Veteran

Glad it was helpful my friend!

Peter Bloomsbury

Thanks so much, it's such a great help I just need to replace mine.

Rita Brown

Thank you for sharing this Intel! 🇺🇸🇺🇸🇺🇸

Daniel Revelation

I am putting soffit and siding on a large workshed to match my home. The Hight is 13.5 feet. I have a problem with boring bees and wasps that I can't reach, so I will probably go with a solid soffit to keep them out.. But can i put up the soffit first before putting on my siding? Thanks! I enjoyed your video.

Ken Moore

Thanks, I had done this in 1999 but couldn't remember how. Thanks a lot

Angie Kimbley

Thanks for the video and your service to our country.

Maria Friend

4y↑2

Thank you, I’m going to give it a try. Wish me luck!

Eggchin

How did it go.

TShirtArtDesignQueen Leo

i have done it many times ...super easy dear...great video

Justanother Channel

I seen the facia nailed on the front end where the gutters will overlay on top of. Would this be visually more better since it’s hidden or you recommend from bottom like that

Claude Clifford

Good video, thanks, it was very helpful.

chooseanameforme888

This is the best soffit and fasica video I've seen anywhere, been looking all day

Brent Warner

I'm replacing old wood soffit with vinyl. The new facia is already in place for our new metal roof. Can I still use this vinyl soffit and clip it together?Also, I have an area that requires 4' pieces(from wall to inside of facia. Will this soffit sag?

Ross Guidotti

Perfect video !! THANK YOU!!!

Charlie J Riley

This entire time I thought soffit was one long piece, this clears up many things LOL

Pa. Fish Preacher

40w

are those soffit screws or what kind are you using?

Trevor Graham

I live in the midwest. We get cold weather. Do I need to put a layer of plywood in the soffit first or does it matter?

gianelpibe

4y↑1

So I wanted to know why not use a whole piece without cutting it... I have about a 13.5 inch gap on my front and I was thinking of using just a whole piece to cover it up... Do I have to cut it in a bunch of small pieces?

Five_star_ Images

5y↑1

Just what I was looking for.thanks. Enjoy your weekend.

Jeff Sadler

Should replace or paint fascia and soffit when changing the color of the house?

Katie Ostreko

Would you be interested in trying Quality Edge soffit and fascia to compare to what you're using today?

G C

Thank you so much for a detailed video. I am not looking to do that. I have no skill in this. I had a contractor come out to diagnose why attic is so hot and he says "6 sections of perforated soffit panels should be cut down, cut openings in wood soffits to clear away insulation blocking air flow and reinstall removed panels". This all sounds greek and latin to me :-) and he is quoting $960, Is this at least in the ballpark. I am not trying to underestimate skills here but don't want to pay double for something that's simple. Your video helped to understand why we need soffit panels (airflow). Ours is a 25+ year old house and generally in a great condition (to provide context), Wondering whether this is normal or unusual in a old house that they did not vent the attic properly.

D C

I pulled some of my soffit down to run some wire and noticed that I also have the plywood soffit. Should the plywood have been removed or left in place? So basically what I have is two levels of soffit - plywood boards inter-spaced with these vented boards, and then a layer of metal soffit with vented panels beneath the vented boards. Worried me that my airflow is restricted.

Sdot K

3y↑1

How can I do a small repair instead of doing the whole side?

Jr Groe

2y↑1

Do you have a video showing how to finish the end piece?? From what I see it will be the edge with the slots showing. What covers that?

Karen Love

4y↑3

It doesn't seem to hard to do it well he makes it look easy I'll paint my house this week then tray to see if I can do that. Very good video sir

tom yang

Would you please provide the link regarding the materials you used.

Dan Simmons

Good production on building the soffit with fascia and the music wasn't too loud either

The Remodeling Veteran

4y↑1

Thanks Dan! Take care in this troubling time.

Gwendolyn Gibbs

36w

Thank you. I am 64 disabled and you wouldn't believe the prices I have been given, so I've decided to do things for myself, and so far, I have saved 5k😅

Cheryl Martin

Perfect. Thanks for the info

Rob

Best video I've found by far!

Aarron E

4y↑1

What’s this stuff called? Lowes Home Depot? Is it paintable? What happens at the end where you gotta go around a corner? Thanks great video

antlou123

Whats the average cost of installation?

Connie Muggli

4y↑1

How to you do the corners?

TheInternalwisdom

thank u ..beautiful video.. now i know i can do this

Goog Pix

38w

If your garage is cutrently insulated and you want to replace this on your garage how do you insulate behind this ?

Antonio Mercado

Wondering why you didnt put drip edge on and slide aluminum fascia under drip edge?

Hussein Tahir

What is the materials used in the wall?

annette Sereno

what kind of workman would I call to do this would like to have the outside wood covered like you did the second part?

Victor Grebelsky

Thanks! Really helped

Load More Comments...

More Comments

just now